Maintenance Recommendations
Regular inspection of tooth pick wear pattern recommended every 2000 operating hours. Replace when tooth profile is reduced by 30% of original height.
Overview
Technical Specs
Wear Parts
ThyssenKrupp
Roll Sizer (CenterSizer & RollSizer DRS)
ThyssenKrupp RollSizer DRS and CenterSizer are specialized for primary and secondary crushing of soft to medium-hard materials. The low-speed twin-shaft design with optimized tooth geometry minimizes fines generation while achieving precise product sizing. Anranst manufactures DRS tooth picks in verified ZG30CrMnMo alloy steel with complete QC documentation and chemical composition certificates.
Typical Applications
Factory
Production Gallery — Anranst Workshop
Technical Data
Roll Sizer (CenterSizer & RollSizer DRS) — Models
| Models | Wear Parts |
|---|---|
| Crushing Principle | Low-speed dual-roll sizing |
| Feed Size | Up to 1500mm |
| Product Size | 25-250mm adjustable |
| Capacity | Up to 14,000 TPH |
Wear Parts
ZG30CrMnMo alloy cast steel (HRC 45-55, AKV 10-15J), optional ASTM A128 Grade B-2 high manganese steel (HB 185-210)
Wear Parts
Roll Sizer (CenterSizer & RollSizer DRS) Wear Parts
Models
DRS 660 S, DRS 1000 x 3000 C(B), DRS 500 x 1000 C(B)
Wear Parts
Tooth Picks, Crushing Segments, Roll Shells
Tooth Pick (Roll Sizer Tooth)
Replaceable tooth segments for ThyssenKrupp CenterSizer and RollSizer DRS series; low-speed dual-roll crushing for coal, salt and minerals
ZG30CrMnMoGB ZG30CrMnMo / Low-alloy Cr-Mo wear steel
HardnessHRC 45-55
ToughnessAKV 10-15J
Tensile Strength≥ 850 MPa
Yield Strength≥ 650 MPa
| Grade | C | Si | Mn | Cr | Mo |
|---|---|---|---|---|---|
| ZG30CrMnMo | 0.26-0.34 | 0.40-0.80 | 0.90-1.30 | 0.90-1.30 | 0.15-0.25 |
Optimized tooth tip shape design for efficient material sizing; proven long service life in coal and mineral applications
Crushing Segment / Roll Shell
RollSizer crushing segments and roll shells; bolt-on design for quick changeover
ZG30CrMnMoGB ZG30CrMnMo / Low-alloy cast steel
HardnessHRC 45-55
ToughnessAKV ≥ 35J
Tensile Strength≥ 900 MPa
Yield Strength≥ 650 MPa
| Grade | C | Si | Mn | Cr | Mo |
|---|---|---|---|---|---|
| ZG30CrMnMo | 0.25-0.35 | 0.3-0.6 | 0.8-1.2 | 0.8-1.2 | 0.15-0.30 |
High strength and wear resistance for sizer tooth applications; verified composition with full QC documentation
ZG30CrNiMoGB ZG30CrNiMo / Ni-Mo alloy cast steel
HardnessHRC 48-58
ToughnessAKV ≥ 40J
Tensile Strength≥ 950 MPa
Yield Strength≥ 700 MPa
| Grade | C | Si | Mn | Cr | Ni | Mo |
|---|---|---|---|---|---|---|
| ZG30CrNiMo | 0.25-0.35 | 0.3-0.6 | 0.7-1.1 | 0.8-1.2 | 1.0-1.5 | 0.15-0.30 |
Superior toughness with Ni addition; ideal for heavy-duty sizer teeth requiring both wear resistance and impact strength
Why Choose Anranst
- OEM-compatible replacement tooth picks with exact fit guarantee
- ZG30CrMnMo alloy steel with verified chemical composition (C 0.26-0.34, Cr 0.9-1.3, Mo 0.15-0.25)
- Complete manufacturing process: casting → machining → heat treatment → quality inspection
- Hardness testing and dimension inspection reports provided with every batch
- 30-50% cost savings vs OEM parts without compromising quality