KREBS Slurry Pumps
Typical Applications
KREBS Slurry Pumps — Models
| Models | Wear Parts |
|---|---|
| Models | millMAX, slurryMAX |
| Wear Parts | Impellers, Liners, Throatbush |
Wear Parts
Manufactured from premium wear-resistant alloys including high-manganese steel, Cr-Mo alloy steel, and high-chrome cast iron.
KREBS Slurry Pumps Wear Parts
Models
millMAX, slurryMAX
Wear Parts
Impellers, Liners, Throatbush
Impeller & Volute Liner
Rotating impeller accelerates slurry; volute liner converts kinetic energy to pressure; both face severe abrasive/erosive wear from solids
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Cr26 | 2.0-3.3 | ≤1.0 | 0.5-1.5 | 23.0-30.0 | 1.0-3.0 | ≤1.5 |
Excellent abrasion resistance with M7C3 carbide network; 3-5x longer life than Mn steel in pure abrasive wear; ideal for vertical mill rollers and VSI rotors
| Grade | Base | Hardness | Tensile | Abrasion |
|---|---|---|---|---|
| Natural Rubber / Polyurethane | NR/SBR or PU | Shore A 50-75 | ≥ 20 MPa | DIN ≤ 150 mm³ |
Superior corrosion and cavitation resistance; reduces noise by 50-70%; ideal for slurry pump liners and flotation cell impellers in acidic/corrosive environments
Liner / Throatbush
KREBS pump wet-end liners; rubber or high-chrome iron options for different slurry conditions
| Grade | C | Si | Mn | Cr | Mo |
|---|---|---|---|---|---|
| Cr20 | 2.0-3.3 | ≤1.2 | ≤1.5 | 18.0-23.0 | ≤3.0 |
High hardness with moderate toughness; excellent for impact-crusher blow bars and hammer tips
| Grade | C | Si | Mn | Cr | Mo |
|---|---|---|---|---|---|
| Cr26 | 2.0-3.3 | ≤1.2 | ≤1.5 | 23.0-30.0 | ≤2.0 |
Highest hardness for abrasive wear; best for fine crushing and grinding applications with low impact
Why Choose Anranst
- Cr26 impellers with optimized vane profile for Krebs gMAX, millMAX and slurryMAX series; 20-30% higher efficiency
- Rubber-lined volute option for fine-particle acidic slurries; eliminates galvanic corrosion risk
- Full Krebs pump coverage: gMAX 3x2-13, millMAX 12, slurryMAX 18x16 and larger