| Models | Wear Parts |
|---|---|
| Models | 42-65 to 60-110 |
| Wear Parts | Mantles, Concaves, Feed mantles |
| Models | to 50, TO 50, EN1304 |
Manufactured from premium wear-resistant alloys including high-manganese steel, Cr-Mo alloy steel, and high-chrome cast iron.
42-65 to 60-110
Mantles, Concaves, Feed mantles
Gyrating crushing surface; primary comminution element in gyratory crushers; profile controls throughput and product top size
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn18Cr2 | 1.05-1.35 | ≤1.0 | 16.0-19.0 | 1.5-2.5 | — | — |
Higher Mn content provides superior work-hardening depth; 20-30% longer service life than Mn13 in high-compression applications
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn22Cr2Mo | 1.10-1.40 | ≤1.0 | 20.0-24.0 | 1.5-2.5 | 0.30-0.60 | — |
Ultra-high Mn + Cr-Mo alloying; maximum work-hardening depth for extreme impact conditions; 30-50% longer life than Mn18
Stationary crushing surface; multi-segment ring assembly surrounding mantle; determines nip angle and crushing chamber profile
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn18Cr2 | 1.05-1.35 | ≤1.0 | 16.0-19.0 | 1.5-2.5 | — | — |
Higher Mn content provides superior work-hardening depth; 20-30% longer service life than Mn13 in high-compression applications
downtime, no increase in power consumption and better quality aggregate.” Sand and gravel producer, Serbia. Had a non-Sandvik VSI that was retrofitted with a Sandvik rotor. UP TO 50% LOWER COST PER TON Results achieved when retrofitting Metso/Barmac VSI crushers VERTICAL SHAFT IMPACT CRUSHER 4 ROCKTECHNOLOGY.SANDVIK PREMIUM SHAPED AGGREGATES Perfect shape is ensured by the unique rotor and B