HPC Cone Crushers
Typical Applications
HPC Cone Crushers — Models
| Models | Wear Parts |
|---|---|
| Models | HPC160-HPC400 |
| Wear Parts | Mantles, Concaves, Bowl liners |
Wear Parts
Manufactured from premium wear-resistant alloys including high-manganese steel, Cr-Mo alloy steel, and high-chrome cast iron.
HPC Cone Crushers Wear Parts
Models
HPC160-HPC400
Wear Parts
Mantles, Concaves, Bowl liners
Mantle (Moving Liner)
Primary crushing surface for SBM HPC multi-cylinder hydraulic cone crushers; high crushing ratio with hydraulic adjustment
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn18Cr2 | 1.05-1.35 | ≤1.0 | 16.0-19.0 | 1.5-2.5 | — | — |
Higher Mn content provides superior work-hardening depth; 20-30% longer service life than Mn13 in high-compression applications
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn22Cr2Mo | 1.10-1.40 | ≤1.0 | 20.0-24.0 | 1.5-2.5 | 0.30-0.60 | — |
Ultra-high Mn + Cr-Mo alloying; maximum work-hardening depth for extreme impact conditions; 30-50% longer life than Mn18
Concave / Bowl Liner
Fixed crushing surface; interchangeable chamber profiles for fine/medium/coarse crushing applications
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn18Cr2 | 1.05-1.35 | ≤1.0 | 16.0-19.0 | 1.5-2.5 | — | — |
Higher Mn content provides superior work-hardening depth; 20-30% longer service life than Mn13 in high-compression applications
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn13Cr2 | 1.05-1.20 | ≤1.0 | 11.5-14.0 | 1.5-2.5 | — | — |
Excellent work-hardening capability; surface hardness increases under impact, ideal for moderate to high impact crushing conditions
Feed Distribution Plate
HPC cone crusher feed plate for even material distribution across crushing chamber
| Grade | C | Si | Mn | Cr |
|---|---|---|---|---|
| Mn13Cr2 | 1.05-1.35 | ≤1.0 | 11.0-14.0 | 1.5-2.5 |
Standard work-hardening steel; cost-effective for moderate impact applications
| Grade | C | Si | Mn | Cr |
|---|---|---|---|---|
| Mn18Cr2 | 1.05-1.35 | ≤1.0 | 16.0-19.0 | 1.5-2.5 |
Superior work-hardening depth; 20-30% longer life than Mn13 in high-compression applications
Why Choose Anranst
- Mn22Cr2Mo mantles for HPC 220-HPC 400 in hard-rock applications; work-hardens to HRC 55+ under compression
- Interchangeable coarse/medium/fine chamber profiles optimize product gradation for different feed sizes
- Full HPC coverage: HPC 160, HPC 220, HPC 315, HPC 400; also HPT series