PE Jaw Crushers
Typical Applications
PE Jaw Crushers — Models
| Models | Wear Parts |
|---|---|
| Models | PE400-PE1200 |
| Wear Parts | Jaw plates, Cheek plates, Toggle plates |
Wear Parts
Manufactured from premium wear-resistant alloys including high-manganese steel, Cr-Mo alloy steel, and high-chrome cast iron.
PE Jaw Crushers Wear Parts
Models
PE400-PE1200
Wear Parts
Jaw plates, Cheek plates, Toggle plates
Jaw Plate (Fixed & Swing)
Primary crushing surfaces for SBM PE series jaw crushers; deep crushing chamber with optimized nip angle
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn13Cr2 | 1.05-1.20 | ≤1.0 | 11.5-14.0 | 1.5-2.5 | — | — |
Excellent work-hardening capability; surface hardness increases under impact, ideal for moderate to high impact crushing conditions
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn18Cr2 | 1.05-1.35 | ≤1.0 | 16.0-19.0 | 1.5-2.5 | — | — |
Higher Mn content provides superior work-hardening depth; 20-30% longer service life than Mn13 in high-compression applications
| Grade | C | Si | Mn | Cr | Mo | Ni |
|---|---|---|---|---|---|---|
| Mn22Cr2Mo | 1.10-1.40 | ≤1.0 | 20.0-24.0 | 1.5-2.5 | 0.30-0.60 | — |
Ultra-high Mn + Cr-Mo alloying; maximum work-hardening depth for extreme impact conditions; 30-50% longer life than Mn18
Cheek Plate (Side Liner)
PE jaw crusher side liners protecting frame walls from abrasive wear
| Grade | C | Si | Mn | Cr |
|---|---|---|---|---|
| Mn13Cr2 | 1.05-1.35 | ≤1.0 | 11.0-14.0 | 1.5-2.5 |
Standard work-hardening steel; cost-effective for moderate impact applications
| Grade | C | Si | Mn | Cr |
|---|---|---|---|---|
| Mn18Cr2 | 1.05-1.35 | ≤1.0 | 16.0-19.0 | 1.5-2.5 |
Superior work-hardening depth; 20-30% longer life than Mn13 in high-compression applications
Toggle Plate
PE jaw crusher toggle plate; safety component that breaks under tramp iron overload
| Grade | C | Si | Mn |
|---|---|---|---|
| ASTM A27 | 0.25-0.35 | ≤0.60 | ≤0.70 |
General-purpose carbon steel casting for thrust plates and non-wear structural parts
Why Choose Anranst
- Optimized corrugated jaw plates for PE 400x600-PE 1500x1800; deep chamber design improves throughput by 15-20%
- Mn22Cr2Mo grade for hard-rock primary crushing (quartzite, granite); 30-50% longer service life than standard Mn13
- Full PE-series coverage: PE 400x600, 500x750, 600x900, 750x1060, 900x1200, 1000x1200, 1200x1500, 1500x1800